manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 283

FUP Messages

File Utility Program (FUP) Reference Manual—523323-014

3-31

Recovery.

Check the BLOCKIN, RECIN, or input record length values. If truncation is 

intended, ignore the warning.

Cause.

This is a warning message. The VARIN option was used with the COPY or 

LOAD command, and the last variable-length record in the block was truncated 
because the record, as indicated by the record length at the beginning of the record, 
extended beyond the end of the block.

Effect.

Execution of the command proceeds; this is only a warning.

Recovery.

Check that the BLOCKIN value (if specified) is correct and that the file was 

generated by FUP COPY with a VAROUT option.

Cause.

The LISTOPENS command does not return information for devices that have 

subdevices.

Effect.

You receive an error message instead of the information you requested.

Recovery.

You need to execute LISTOPENS for specific terminals. An example is 

LISTOPENS $TC1.#C13.

Cause.

A SUSPEND command was issued, but the RELOAD command could not be 

stopped.

Effect.

The command fails.

Recovery.

Check that you have proper security access to stop the reload server 

process and then retry the command.

Cause.

An attempt to create or alter a file failed because unique keys were not the 

same length within the same alternate-key file.

Effect.

The command fails.

Recovery.

Place unique keys with different lengths in different key files.

Cause.

The attempted command was not a FUP command.

Effect.

The command fails.

TRUNCATION OF LAST VARIABLE LENGTH RECORD IN BLOCK

TRY THIS COMMAND ON SPECIFIC SUBDEVICES

filename: UNABLE TO SUSPEND RELOAD

UNIQUE KEYS MUST HAVE SAME LENGTH WITHIN AN ALTERNATE KEY 
FILE

UNKNOWN COMMAND

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands