HP E4510-48G, Command Reference Manual

Page: 1062 / 1334

5-28
Next backup startup saved-configuration file: NULL
Slot 2:
Current startup saved-configuration file: NULL
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
// The above information indicates that the main configuration file for the next startup of all the member
devices in the stack is changed to startup.cfg.
# Save the current configuration in the name of test.cfg to a slave (with the member ID of 2) (approach
1).
<Sysname> save test.cfg slot 2
The current configuration will be saved to slot2#flash:/test.cfg. Continue? [Y/N]:y
Now saving current configuration to the device.
Saving configuration slot2#flash:/test.cfg. Please wait...
.........
Configuration is saved to slot2#flash successfully.
Or, you can use the following command (approach 2):
<Sysname> save slot2#flash:/test.cfg
slave auto-update config
Syntax
slave auto-update config
undo slave auto-update config
View
System view
Default Level
2: System level
Parameters
None
Description
Use the slave auto-update config command to enable the configuration file auto-save function.
Use the undo slave auto-update config command to disable the function.
By default, the configuration file auto-save function is enabled.
Examples
# Enable the configuration file auto-save function.
<Sysname> system-view
[Sysname] slave auto-update config