HP E4510-48G, Command Reference Manual

Page: 829 / 1334

14-10
Field Description
rule 5 comment This rule is used in geth
1/0/1 The description of ACL rule 5 is “This rule is used in
geth 1/0/1.”
reset acl counter
Syntax
reset acl counter { acl-number | all | name acl-name }
View
User view
Default Level
2: System level
Parameters
acl-number : IPv4 ACL number, which must be in the following ranges:
z
2000 to 2999 for basic IPv4 ACLs
z
3000 to 3999 for advanced IPv4 ACLs
z
4000 to 4999 for Ethernet frame header ACLs
all : Specifies all IPv4 ACLs except for user-defined ACLs.
name acl-name : Specifies the name of the ACL, which is a case insensitive string of 1 to 32 characters.
It must start with an English letter and cannot be the English word of all to avoid confusion.
Description
Use the reset acl counter command to clear statistics on a specified IPv4 ACL or all IPv4 ACLs that
are referenced by upper layer software.
Examples
# Clear statistics on IPv4 ACL 2001.
<Sysname> reset acl counter 2001
# Clear statistics on IPv4 ACL flow .
<Sysname> reset acl counter name flow
rule (basic IPv4 ACL view)
Syntax
rule [ rule-id ] { deny | permit } [ fragment | logging | source { sour-addr sour-wildcard | any } |
time-range time-range-name | vpn-instance vpn-instance-name ] *
undo rule rule-id [ fragment | logging | source | time-range | vpn-instance ] *
View
Basic IPv4 ACL view