HP E4510-48G, Command Reference Manual

Page: 443 / 1334

3-9
Table 3-5 display rip route statistics command output description
Field Description
Peer IP address of a neighbor
Aging Total number of aging routes learned from the specified neighbor
Permanent Total number of permanent routes learned from the specified neighbor
Garbage
Total number of routes in the garbage-collection state learned from the specified
neighbor
Total Total number of routes learned from all RIP neighbors
filter-policy export (RIP view)
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol [ process-id ] | interface-type
interface-number ]
undo filter-policy export [ protocol [ process-id ] | interface-type interface-number ]
View
RIP view
Default Level
2: System level
Parameters
acl-number : Number of an ACL used to filter outbound routes, in the range of 2000 to 3999.
ip-prefix ip-prefix-name : Name of an IP prefix list used to filter outbound routes, a string of 1 to 19
characters.
protocol : Filters outbound routes redistributed from a specified routing protocol, which can be direct , ,
rip , and static .
process-id : Process ID of the specified routing protocol, in the range of 1 to 65535. You need to specify
a process ID when the routing protocol is rip .
interface-type interface-number : Specifies an interface.
Description
Use the filter-policy export command to configure the filtering of RIP outgoing routes. Only routes not
filtered out can be advertised.
Use the undo filter-policy export command to remove the filtering.
By default, RIP does not filter outbound routes.
Note that:
z
If protocol is specified, RIP filters only the outgoing routes redistributed from the specified routing
protocol. Otherwise, RIP filters all routes to be advertised.
z
If interface-type interface-number is specified, RIP filters only the routes advertised by the
specified interface. Otherwise, RIP filters routes advertised by all RIP interfaces.