22-4
Table 22-3 display ipc group
command output description
Field
Description
GroupID
Multicast group ID
Status
Link status, which may take the following values:
INUSE: The multicast group is in use.
DELETE: The multicast group is to be deleted.
ChannelID Channel
number
display ipc node
Syntax
display ipc node
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the
display ipc node
command to display node information.
Examples
# Display node information of the device.
<Sysname> display ipc node
Self node ID: 6
Current active node ID: 2,3,6,8
Table 22-4 display ipc node
command output description
Field
Description
Self node ID
Number of the local node
Current active node ID
List of the current active nodes
display ipc packet
Syntax
display ipc packet
{
node node-id
|
self-node
}
View
Any view
Summary of Contents for E4510-48G
