HP E4510-48G, Command Reference Manual

Page: 876 / 1334

3-6
Rcv 0 0 0 0 0 0 0
Secondary port: GigabitEthernet1/0/4
Packet Link Common Complete Edge Major Packet
Direct Hello Down Flush FDB Flush FDB Hello Fault Total
------------------------------------------------------------------------------
Send 0 0 0 0 0 0 0
Rcv 16878 0 0 1 0 0 16879
Ring ID : 2
Ring Level : 1
Node Mode : Edge
Active Status : No
Common port : GigabitEthernet1/0/3
Packet Link Common Complete Edge Major Packet
Direct Hello Down Flush FDB Flush FDB Hello Fault Total
------------------------------------------------------------------------------
Send 0 0 0 0 0 0 0
Rcv 0 0 0 0 0 0 0
Common port : GigabitEthernet1/0/4
Packet Link Common Complete Edge Major Packet
Direct Hello Down Flush FDB Flush FDB Hello Fault Total
------------------------------------------------------------------------------
Send 0 0 0 0 0 0 0
Rcv 0 0 0 0 0 0 0
Edge port : GigabitEthernet1/0/5
Packet Link Common Complete Edge Major Packet
Direct Hello Down Flush FDB Flush FDB Hello Fault Total
------------------------------------------------------------------------------
Send 0 0 0 0 0 0 0
Rcv 0 0 0 0 0 0 0
Table 3-3 display rrpp statistics command output description
Field Description
Ring ID RRPP ring ID
Ring Level
RRPP ring level:
z
0 for primary ring
z
1 for subring
Node Mode
Node mode:
z
Master node
z
Transit node
z
Edge node
z
Assistant edge node
Active Status
RRPP ring activation status:
z
Yes for active
z
No for inactive
Primary Port
The primary port field means the node mode is master node or
transit node. “-“ appears when the port is not configured on the ring
or the board to which the port belongs does not start, and in this
case, no corresponding statistics appears.