HP E4510-48G, Command Reference Manual

Page: 639 / 1334

1-24
Parameters
isp-name : Name of the default ISP domain, a string of 1 to 24 characters.
Description
Use the domain default enable command to configure the system default ISP domain.
Use the undo domain default enable command to restore the default.
By default, there is a default ISP domain named system .
Note that:
z
There must be only one default ISP domain.
z
The specified domain must have existed; otherwise, users without any domain name carried in the
user name will fail to be authenticated.
z
The default ISP domain configured cannot be deleted unless you configure it as a non-default
domain again.
Related commands: state , display domain .
Examples
# Create a new ISP domain named aabbcc.net , and configure it as the default ISP domain.
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net] quit
[Sysname] domain default enable aabbcc.net
expiration-date
Syntax
expiration-date time
undo expiration-date
View
Local user view
Default Level
3: Manage level
Parameters
time : Expiration time of the local user, in the format HH:MM:SS-MM/DD/YYYY or
HH:MM:SS-YYYY/MM/DD. HH:MM:SS indicates the time, where HH ranges from 0 to 23, MM and SS
range from 0 to 59. YYYY/MM/DD indicates the date, where YYYY ranges from 2000 to 2035, MM
ranges from 1 to 12, and DD depends on the month. Except for the zeros in 00:00:00, leading zeros
can be omitted. For example, 2:2:0-2008/2/2 equals to 02:02:00-2008/02/02.
Description
Use the expiration-date command to configure the expiration time of a local user.
Use the undo expiration-date command to remove the configuration.
By default, a local user has no expiration time and no time validity checking is performed.