HP E4510-48G, Command Reference Manual

Page: 1191 / 1334

16-14
View
System view
Default Level
2: System level
Parameters
channel - number : Specifies a channel number, in the range 0 to 9.
channel - name : Specifies a channel name, which could be a default name or a self-defined name. The
user needs to specify a channel name first before using it as a self-defined channel name. For more
information, refer to the info-center channel name command.
Description
Use the info-center monitor channel command to configure the channel to output system information
to the monitor.
Use the undo info-center monitor channel command to restore the default channel to output system
information to the monitor.
By default, output of system information to the monitor is enabled with a default channel name of
monitor and a default channel number of 1.
Note that the info-center monitor channel command takes effect only after the information center is
enabled with the info-center enable command.
Examples
# Output system information to the monitor through channel 0.
<Sysname> system-view
[Sysname] info-center monitor channel 0
info-center snmp channel
Syntax
info-center snmp channel { channel - number | channel - name }
undo info-center snmp channel
View
System view
Default Level
2: System level
Parameters
channel - number : Specifies a channel number, in the range 0 to 9.
channel - name : Specifies a channel name, which could be a default name or a self-defined name. The
user needs to specify a channel name first before using it as a self-defined channel name. For more
information, refer to the info-center channel name command.