18-20
View
System view
Default Level
2: System level
Parameters
None
Description
Use the
nqa agent enable
command to enable the NQA client.
Use the
undo nqa agent enable
command to disable the NQA client and stop all the tests being
performed.
By default, the NQA client is enabled.
Related commands:
nqa server enable
.
Examples
# Enable the NQA client.
<Sysname> system-view
[Sysname] nqa agent enable
nqa agent max-concurrent
Syntax
nqa agent max-concurrent
number
undo nqa agent max-concurrent
View
System view
Default Level
2: System level
Parameters
number
: Maximum number of the tests that the NQA client can simultaneously perform, in the range 1
to 5. The default value is 2..
Description
Use the
nqa agent max-concurrent
command to configure the maximum number of tests that the
NQA client can simultaneously perform.
Use the
undo nqa agent max-concurrent
command to restore the default.
From the beginning to the end of a test, the NQA test is in the test status; from the end of a test to the
beginning of the next test, the NQA test is in the waiting status.
Summary of Contents for E4510-48G
