HP E4510-48G, Command Reference Manual

Page: 468 / 1334

5-3
Description
Use the display ripng command to display the running status and configuration information of a
RIPng process. If process-id is not specified, information of all RIPng processes will be displayed.
Examples
# Display the running status and configuration information of all configured RIPng processes.
<Sysname> display ripng
RIPng process : 1
Preference : 100
Checkzero : Enabled
Default Cost : 0
Maximum number of balanced paths : 1
Update time : 30 sec(s) Timeout time : 180 sec(s)
Suppress time : 120 sec(s) Garbage-Collect time : 120 sec(s)
Number of periodic updates sent : 0
Number of trigger updates sent : 0
Table 5-1 display ripng command output description
Field Description
RIPng process RIPng process ID
Preference RIPng route priority
Checkzero
Indicates whether zero field check for RIPng
packet headers is enabled
Default Cost Default metric of redistributed routes
Maximum number of balanced paths Maximum number of load balanced routes
Update time RIPng update interval, in seconds
Timeout time RIPng timeout interval, in seconds
Suppress time RIPng suppress interval, in seconds
Garbage-Collect time RIPng garbage collection interval, in seconds
Number of periodic updates sent Number of periodic updates sent
Number of trigger updates sent Number of triggered updates sent
display ripng database
Syntax
display ripng process-id database
View
Any view
Default Level
1: Monitor level