HP E4510-48G, Command Reference Manual

Page: 426 / 1334

1-17
Description
Use the display ipv6 routing-table ipv6-prefix command to display routes permitted by the IPv6
prefix list.
Examples
# Display brief active routing information permitted by the IPv6 prefix list test2 .
<Sysname> display ipv6 routing-table ipv6-prefix test2
Routes Matched by Prefix list test2 :
Summary Count : 1
Destination: 100::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0
Refer to Table 1-4 for description about the above output.
display ipv6 routing-table protocol
Syntax
display ipv6 routing-table protocol protocol [ inactive | verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
protocol : Displays routes of a routing protocol, which can be direct , ripng and static .
inactive : Displays only inactive routes. Without the keyword, all active and inactive routes are
displayed.
verbose : Displays both active and inactive verbose routing information. Without this keyword, only
brief active routing information is displayed.
Description
Use the display ipv6 routing-table protocol command to display routes of a specified routing
protocol.
Examples
# Display brief information about all direct routes.
<Sysname> display ipv6 routing-table protocol direct
Direct Routing Table :
Summary Count : 1
Direct Routing Table's Status : < Active >
Summary Count : 1