HP E4510-48G, Command Reference Manual

Page: 402 / 1334

13-2
Field Description
sFlow Global Information sFlow global configuration information
Agent IP address of the sFlow agent
Collector IP address and port number of each sFlow collector
Interval(s) Counter sampling interval (sFlow interval)
sFlow Port Information Information of the ports enabled with sFlow
Interface sFlow enabled interface
Direction
Packet sampling direction:
z
In: Samples inbound packets.
z
Out: Samples outbound packets.
z
In/Out: Samples inbound and outbound packets.
Rate Packet sampling rate
Mode
Packet sampling mode:
z
Determine: Samples a fixed number of packets.
z
Random: Samples a random number of packets.
Status
Status of the sFlow enabled port:
z
Suspend: Indicates the port is suspended, and it stops
sampling.
z
Active: Indicates the port is active and performs sampling.
sflow agent ip
Syntax
sflow agent ip ip-address
undo sflow agent ip
View
System view
Default Level
2: System level
Parameters
ip-address : IP address of the sFlow agent.
Description
Use the sflow agent ip command to configure the IP address of the sFlow agent.
Use the undo sflow agent ip command to remove the configured IP address.
By default, no IP address is configured for the sFlow agent.
Note that:
z
The sFlow agent and sFlow collector must not have the same IP address.
z
Currently, a device supports only one sFlow agent.