HP E4510-48G, Command Reference Manual

Page: 1134 / 1334

10-27
To make the configured user take effect, create an SNMP group first.
Related commands: snmp-agent group, snmp-agent community, snmp-agent usm-user v3.
Examples
# Create a v2c user userv2c in group readCom .
<Sysname> system-view
[Sysname] snmp-agent sys-info version v2c
[Sysname] snmp-agent group v2c readCom
[Sysname] snmp-agent usm-user v2c userv2c readCom
z
Set the SNMP version on the NMS to SNMPv2c
z
Fill in the read community name userv2c , and then the NMS can access the agent
# Create a v2c user userv2c in group readCom , allowing only the NMS with the IP address of 1.1.1.1
to access the agent by using this user name; other NMSs are not allowed to access the agent by using
this user name.
<Sysname> system-view
[Sysname] acl number 2001
[Sysname-acl-basic-2001] rule permit source 1.1.1.1 0.0.0.0
[Sysname-acl-basic-2001] rule deny source any
[Sysname-acl-basic-2001] quit
[Sysname] snmp-agent sys-info version v2c
[Sysname] snmp-agent group v2c readCom
[Sysname] snmp-agent usm-user v2c userv2c readCom acl 2001
z
Set the IP address of the NMS to 1.1.1.1
z
Set the SNMP version on the NMS to SNMPv2c
z
Fill in both the read community and write community options with userv2c , and then the NMS can
access the agent.
snmp-agent usm-user v3
Syntax
snmp-agent usm-user v3 user-name group-name [ cipher ] [ authentication-mode { md5 | sha }
auth-password [ privacy-mode { 3des | aes128 | des56 } priv-password ] ] [ acl acl-number ]
undo snmp-agent usm-user v3 user-name group-name { local | engineid engineid-string }
View
System view
Default Level
3: Manage level
Parameters
user-name : User name, a string of 1 to 32 characters. It is case sensitive.
group-name : Group name, a string of 1 to 32 characters. It is case sensitive.
cipher : Specifies that auth-password and priv-password are cipher text passwords, which can be
calculated by using the snmp-agent calculate-password command.