14-3
View
Any view
Default Level
1: Monitor level
Parameters
time-range-name
: Time range name, a case insensitive string of 1 to 32 characters. It must start with
an English letter and cannot be the English word of all to avoid confusion.
all
: Specifies all existing time ranges.
Description
Use the
display
time-range
command to display the configuration and status of a specified time range
or all time ranges.
A time range is active if the system time falls into its range.
Examples
# Display the configuration and status of time range
trname
.
<Sysname> display time-range trname
Current time is 22:20:18 1/5/2006 Thursday
Time-range : trname ( Inactive )
from 15:00 1/28/2006 to 15:00 1/28/2008
Table 14-2 display time-range
command output description
Field
Description
Current time
Current system time
Time-range
Configuration and status of the time range, including the name of the
time range, its status (active or inactive), and its start time and end time.
time-range
Syntax
time-range
time-range-name
{
start-time
to
end-time
days
[
from time1 date1
] [
to time2 date2
] |
from time1 date1
[
to time2 date2
] |
to time2 date2
}
undo
time-range
time-range-name
[
start-time
to
end-time
days
[
from time1 date1
] [
to time2 date2
]
|
from time1 date1
[
to time2 date2
] |
to time2 date2
]
View
System view
Default Level
2: System level
Summary of Contents for E4510-48G
