HP E4510-48G, Command Reference Manual

Page: 1070 / 1334

6-6
Examples
# Set the FTP update mode to normal .
<Sysname> system-view
[Sysname] ftp update normal
FTP Client Configuration Commands
z
In this section, the configuration procedure of entering FTP client view is omitted. You must use
the ftp command to enter FTP client view for configurations under this view. For details, refer to
ftp .
z
Before executing the FTP client configuration commands in this section, make sure you have
configured the proper authority for users on the FTP server, such as view the files under the
current directory, read/download the specified file, create directory/upload files, rename/remove
files, and so on.
z
The prompt information in the examples of this section varies with FTP server types.
ascii
Syntax
ascii
View
FTP client view
Default Level
3: Manage level
Parameters
None
Description
Use the ascii command to set the file transfer mode to ASCII.
By default, the file transfer mode is ASCII.
The carriage return characters vary with operating systems. For example, to indicate the end of a line
and transfer to the next line, the 3COM device system and Windows system use characters /r/n , and
the Linux system uses characters /n . Therefore, after the file transmission between two systems that
use different carriage return characters, such as Linux system and 3COM device system, the FTP
transmission mode must be applied to ensure the correct resolution of the files.
FTP transfers files in two modes:
z
Binary mode: for program file or picture transmission.