HP E4510-48G, Command Reference Manual

Page: 202 / 1334

6-23
Field Description
Protocol Type Protocol type specified by the protocol template
display protocol-vlan vlan
Syntax
display protocol-vlan vlan { vlan - id1 [ to vlan - id2 ] | all }
View
Any view
Default Level
2: System level
Parameters
vlan - id1 : ID of the protocol-based VLAN for which information is to be displayed, in the range of 1 to
4094.
vlan - id1 to vlan - id2 : Displays protocol-based VLAN information of a VLAN range from vlan-id1 to
vlan - id2 . The vlan - id2 argument specifies a protocol-based VLAN ID in the range of 1 to 4094, but you
must ensure that its value is greater than or equal to that of vlan - id1 .
all : Displays information about all protocol-based VLANs.
Description
Use the display protocol-vlan vlan command to display the protocols and protocol indexes
configured on the specified VLAN(s).
Related commands: display vlan .
Examples
# Display the protocols and protocol indexes configured on all protocol-based-VLANs.
<Sysname> display protocol-vlan vlan all
VLAN ID:2
Protocol Index Protocol Type
======================================================
0 ipv4
VLAN ID:3
Protocol Index Protocol Type
======================================================
0 ipv4
1 ipx snap
Refer to Table 6-5 for description of the output.