10-6
Parameters
None
Description
Use the
ssh server enable
command to enable SSH server.
Use the
undo ssh server enable
command to disable SSH server.
By default, SSH server is disabled.
Examples
# Enable SSH server.
<Sysname> system-view
[Sysname] ssh server enable
ssh server rekey-interval
Syntax
ssh server rekey-interval
hours
undo ssh server rekey-interval
View
System view
Default Level
2: System level
Parameters
hours:
Server key pair update interval in hours, in the range 1 to 24.
Description
Use the
ssh server rekey-interval
command to set the interval for updating the RSA server key.
Use the
undo ssh server rekey-interval
command to remove the configuration.
By default, the update interval of the RSA server key is 0, that is, the RSA server key is not updated.
Related commands:
display
ssh
server
.
z
This command is only available to SSH users using SSH1 client software.
z
The system does not update any DSA key pair periodically.
Examples
# Set the RSA server key pair update interval to 3 hours.
<Sysname> system-view
Summary of Contents for E4510-48G
