HP E4510-48G, Command Reference Manual

Page: 1330 / 1334

22-5
Default Level
1: Monitor level
Parameters
node node-id : Displays the packet statistics information of the specified node, where node-id
represents the number of the specified node, in the range of 0 to 9.
self-node : Displays the packet statistics information of the local node.
Description
Use the display ipc packet command to display the packet statistics information of the specified node.
Examples
# Display the packet statistics information of the local node.
<Sysname> display ipc packet self-node
ChannelID Sent-fragments Sent-packets Received-fragments Received-packets
--------------------------------------------------------------------------
11 828 810 819 810
13 0 0 0 0
14 5 3 5 5
15 0 0 0 0
16 0 0 0 0
17 50 50 37 35
19 0 0 0 0
Table 22-5 display ipc packet command output description
Field Description
ChannelID Channel number
Sent-fragments Number of fragments sent
Sent-packets
Number of packets sent (whether a packet is fragmented depends on
the interface MTU. If the number of bytes the packet is larger than the
MTU, the packet is fragmented; if smaller than or equal to the MTU, the
packet is sent.)
Received-fragments Number of fragments successfully received
Received-packets
Number of packets successfully received (if fragments are received on
an interface, the system reassembles the fragments and sends a
complete packet to the upper layer software.)
display ipc performance
Syntax
display ipc performance { node node-id | self-node } [ channel channel-id ]
View
Any view