1-13
Parameters
None
Description
Use the
display ipv6 routing-table
command to display brief routing table information, including
destination IP address and prefix, protocol type, priority, metric, next hop and outbound interface.
The command displays only active routes, namely, the brief information about the current optimal
routes.
Examples
# Display brief routing table information
<Sysname> display ipv6 routing-table
Routing Table :
Destinations : 1 Routes : 1
Destination : ::1/128 Protocol
: Direct
NextHop : ::1 Preference
: 0
Interface : InLoop0 Cost
: 0
Table 1-4 display ipv6 routing-table
command output description
Field
Description
Destination
IPv6 address of the destination network/host
NextHop Nexthop
address
Preference Route
priority
Interface Outbound
interface
Protocol Routing
protocol
Cost Route
cost
display ipv6 routing-table acl
Syntax
display ipv6 routing-table acl
acl6-number
[
verbose
]
View
Any view
Default Level
1: Monitor level
Parameters
acl6-number:
Basic IPv6 ACL number, in the range 2000 to 2999.
verbose
: Displays both active and inactive verbose routing information permitted by the ACL. Without
this keyword, only brief active routing information is displayed.
Summary of Contents for E4510-48G
