HP E4510-48G, Command Reference Manual

Page: 933 / 1334

6-19
Field Description
One or more streams of
cross-connect CCMs is
received. The last-received
CCM:
Cross-connect CCMs are received, and the content of the last
cross-connect CCM is displayed. (This information is displayed only
when cross-connect CCM(s) is/are received.)
Some other MEPs are
transmitting the RDI bit.
CCMs with RDI bits misplaced are received from other MEPs. (This
information is displayed only when this type of CCM(s) is/are
received.)
display cfd mp
Syntax
display cfd mp [ interface interface-type interface-number ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number : Specifies a port by its type and number.
Description
Use the display cfd mp command to display the MP information.
Note that:
z
If no port is specified, this command displays the MP information on all ports.
z
The information displayed is sorted by port name primarily in the ascending VLAN ID order within
the same port, and in the order of outward-facing MEPs (from low to high level), MIPs, and
inward-facing MEPs (from high to low level) within the same VLAN.
Examples
# Display the MP information on all ports.
<Sysname> display cfd mp
Interface GigabitEthernet1/0/1 VLAN 100
MEP ID: 100 Level: 0 Service instance: 100 Direction: Outbound
Maintenance domain: mdtest0
Maintenance association: mainmd0
MEP ID: 105 Level: 5 Service instance: 105 Direction: Outbound
Maintenance domain: mdtest5
Maintenance association: mainmd5
MIP Level: 6 Service instance: 106
Maintenance domain: mdtest6
Maintenance association: mainmd6