HP E4510-48G, Command Reference Manual

Page: 244 / 1334

12-2
monitor egress port: GigabitEthernet1/0/11
remote-probe vlan: 200
Table 12-1 Description on the fields of the display mirroring-group command
Field Description
mirroring-group Number of the port mirroring group
type
Type of the port mirroring group, which can be one of the following:
local, remote-source, or remote-destination.
status Status of the port mirroring group, which can be active or inactive.
mirroring port Source mirroring port
monitor port Destination mirroring port
monitor egress port Outbound mirroring port
remote-probe vlan Remote mirroring VLAN
mirroring-group
Syntax
mirroring-group groupid { local | remote-destination | remote-source }
undo mirroring-group { groupid | all | local | remote-destination | remote-source }
View
System view
Default Level
2: System level
Parameters
groupid : Specifies the number of the port mirroring group to be created or removed, in the range of 1 to
4.
all : Removes all port mirroring groups.
local : Creates a local mirroring group or removes all local mirroring groups with the undo command.
remote-destination : Creates a remote destination mirroring group or removes all remote destination
mirroring groups with the undo command.
remote-source : Creates a remote source mirroring group or removes all remote source mirroring
groups with the undo command.
Description
Use the mirroring-group command to create a port mirroring group.
Use the undo mirroring-group command to remove the specified port mirroring group or groups.
To mirror packets from a port to another port on the same device, create a local mirroring group.
To mirror packets from a port (a mirroring port) on the current device to another port (the monitor port)
either on the same device or on a different device, create remote mirroring groups. When doing that,