HP E4510-48G, Command Reference Manual

Page: 1249 / 1334

18-41
z
The IP address and port number must be consistent with those on the NQA client and must be
different from those for an existing listening service.
z
The IP address must be that of an interface on the NQA server. Otherwise, the configuration will
be invalid.
Related commands: nqa server enable and display nqa server status .
Examples
# Create a TCP listening service by using the IP address 169.254.10.2 and port 9000.
<Sysname> system-view
[Sysname] nqa server tcp-connect 169.254.10.2 9000
nqa server udp-echo
Syntax
nqa server udp-echo ip-address port-number
undo nqa server udp-echo ip-address port-number
View
System view
Default Level
2: System level
Parameters
ip-address : IP address specified for the UDP listening service on the NQA server.
port-number : Port number specified for the UDP listening service on the NQA server, in the range 1 to
50000.
Description
Use the nqa-server udp-echo command to create a UDP listening service on the NQA server.
Use the undo nqa-server udp-echo command to remove the UDP listening service created.
Note that:
z
You need to configure the command on the NQA server for UDP jitter, UDP echo and voice tests
only.
z
The IP address and port number must be consistent with those configured on the NQA client and
must be different from those of an existing listening service.
z
The IP address must be that of an interface on the NQA server. Otherwise, the configuration will
be invalid.
Related commands: nqa server enable and display nqa server status .
Examples
# Create a UDP listening service by using the IP address 169.254.10.2 and port 9000.
<Sysname> system-view
[Sysname] nqa server udp-echo 169.254.10.2 9000