13-4
# Add a static entry for MAC address 000f-e201-0102 on port Bridge-Aggregation 1 that belongs to
VLAN 1.
<Sysname> system-view
[Sysname] interface bridge-Aggregation 1
[Sysname-Bridge-Aggregation1] mac-address static 000f-e201-0102 vlan 1
mac-address (system view)
Syntax
mac-address blackhole
mac
-
address
vlan
vlan
-
id
mac-address
{
dynamic
|
static
}
mac
-
address interface interface
-
type interface
-
number
vlan
vlan
-
id
undo mac-address
[ {
dynamic
|
static
}
mac
-
address interface interface
-
type interface
-
number
vlan
vlan
-
id
]
undo mac-address
[
blackhole
|
dynamic
|
static
]
[
mac
-
address
]
vlan
vlan
-
id
undo mac-address
[
dynamic
| static
]
mac-address interface interface
-
type interface
-
number vlan
vlan
-
id
undo mac-address
[
dynamic | static
]
interface interface
-
type interface
-
number
View
System view
Default Level
2: System level
Parameters
blackhole
: Destination blackhole MAC address entries. These entries do not age but you can add or
remove them. The packets whose destination MAC addresses match destination blackhole MAC
address entries are dropped.
mac
-
address
: Specifies a MAC address in the format of H-H-H, where 0s at the beginning of each H
(16-bit hexadecimal digit) can be omitted; for example, inputting “f-e2-1” indicates that the MAC
address is “000f-00e2-0001”.
vlan vlan
-
id
: Specifies an existing VLAN to which the Ethernet interface belongs, where
vlan-id
is the
specified VLAN ID, in the range 1 to 4094.
dynamic
: Dynamic MAC address entries. Aging time is set for these entries.
static
: Static MAC address entries. These entries do not age but you can add or remove them.
interface interface
-
type interface
-
number
: Outbound interface, with
interface
-
type interface
-
number
representing the interface type and number.
Description
Use the
mac-address
command to add or modify a MAC address entry.
Use the
undo mac-address
command to remove one or all MAC address entries.
Note that a static or blackhole entry will not be overwritten by a dynamic entry, but a dynamic entry can
be overwritten by a static or blackhole entry. However, you can delete any type of MAC address
entries.
Summary of Contents for E4510-48G
