HP E4510-48G, Command Reference Manual

Page: 920 / 1334

6-6
Reply from 0010-FC00-6512: sequence number=1101-43404
Reply from 0010-FC00-6512: sequence number=1101-43405
Reply from 0010-FC00-6512: sequence number=1101-43406
Reply from 0010-FC00-6512: sequence number=1101-43407
Reply from 0010-FC00-6512: sequence number=1101-43408
Send:5 Received:5 Lost:0
Table 6-3 cfd loopback command output description
Field Description
Loopback to mac-address with the sequence
number start from sequence-number
Sends LBMs to mac-address with the sequence
number starting with sequence-number
Reply from mac-address Reply from mac-address
sequence number Sequence number in the LBR messages
Send Number of LBMs sent
Received Number of LBR messages received
Lost Number of lost LBMs
cfd ma
Syntax
cfd ma ma-name md md-name vlan vlan-id
undo cfd ma ma-name md md-name
View
System view
Default level
2: System level
Parameters
ma-name : Name of the MA, a string of 1 to 48 characters, composed of letters, numbers or underlines,
but cannot start with an underline character.
md md-name : Specifies the name of an MD, a string of 1 to 48 characters, composed of letters,
numbers or underlines, but cannot start with an underline character.
vlan vlan-id : Specifies the ID of the VLAN where MA is in service, ranging from 1 to 4094.
Description
Use the cfd ma command to create MA(s) in an MD.
Use the undo cfd ma command to delete specified MA in an MD.
By default, no MA is created.
Note that:
z
Before creating an MA, you must create an MD first.
z
When deleting an MA, you will also delete the configurations related to that MA.