HP E4510-48G, Command Reference Manual

Page: 411 / 1334

1-2
Use the display ip routing-table verbose command to display detailed information about all routes in
the routing table.
This command displays detailed information about all active and inactive routes, including the statistics
of the entire routing table and information for each route.
Examples
# Display brief information about active routes in the routing table.
<Sysname> display ip routing-table
Routing Tables: Public
Destinations : 4 Routes : 4
Destination/Mask Proto Pre Cost NextHop Interface
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
192.168.80.0/24 Direct 0 0 192.168.80.10 Vlan1
192.168.80.10/32 Direct 0 0 127.0.0.1 InLoop0
Table 1-1 display ip routing-table command output description
Field Description
Destinations Number of destination addresses
Routes Number of routes
Destination/Mask Destination address/mask length
Proto Protocol that presents the route
Pre Priority of the route
Cost Cost of the route
Nexthop Address of the next hop on the route
Interface Outbound interface for packets to be forwarded along the route
# Display detailed information about all routes in the routing table.
<Sysname> display ip routing-table verbose
Routing Table : Public
Destinations : 4 Routes : 4
Destination: 10.1.1.0/24
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 10.1.1.1 Interface: Vlan-interface1
RelyNextHop: 0.0.0.0 Neighbour: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active Adv Age: 04h00m30s
Tag: 0
Destination: 10.1.1.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0