HP E4510-48G, Command Reference Manual

Page: 887 / 1334

3-17
Examples
# Enable the RRPP protocol.
<Sysname> system-view
[Sysname] rrpp enable
rrpp ring-group
Syntax
rrpp ring-group ring-group-id
undo rrpp ring-group ring-group-id
View
System view
Default Level
2: System level
Parameters
ring-group-id : RRPP ring group ID, in the range 1 to 8.
Description
Use the rrpp ring-group command to create an RRPP ring group and enter RRPP ring group view.
Use the undo rrpp ring-group command to delete an RRPP ring group.
Note that:
z
RRPP configured with ring groups cannot interoperate with RRPP that does not support ring
group configuration.
z
When removing a ring group, do that on the edge node first and then on the assistant-edge node.
If you fail to follow the order, the assistant-edge node may fail to receive Edge-Hello packets and
thus mistakenly considers that the primary ring has failed.
z
After a ring group is removed, all subrings in the ring group do not belong to any ring group.
Related commands: domain ring , display rrpp ring-group .
Examples
# Create RRPP ring group 1 and enter its view.
<Sysname> system-view
[Sysname] rrpp ring-group 1
[Sysname-rrpp-ring-group1]
timer
Syntax
timer hello-timer hello-value fail-timer fail-value
undo timer