HP E4510-48G, Command Reference Manual

Page: 1244 / 1334

18-36
By default, the maximum number of hops that a probe packet can traverse in a network is 20.
Note that after you configure the route-option bypass-route command, the maximum number of hops
a probe packet traverses in the network is 1, and the ttl command does not take effect.
Examples
# Configure the maximum number of hops that a probe request can traverse in a network as 16.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] ttl 16
type
Syntax
type { dhcp | dlsw | ftp | http | icmp-echo | snmp | tcp | udp-echo | udp-jitter | voice }
View
NQA test group view
Default Level
2: System level
Parameters
dhcp : DHCP test.
dlsw : DLSw test.
ftp : FTP test.
http : HTTP test.
icmp-echo : ICMP echo test.
snmp : SNMP test.
tcp : TCP test.
udp-echo : UDP echo test.
udp-jitter : UDP jitter test.
voice : Voice test.
Description
Use the type command to configure the test type of the current test group and enter test type view.
By default, no test type is configured.
Examples
# Configure the test type of a test group as FTP and enter test type view.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp]