HP E4510-48G, Command Reference Manual

Page: 102 / 1334

2-11
undo interface bridge-aggregation interface-number
View
System view
Default Level
2: System level
Parameters
interface-number : Layer-2 aggregate interface number. The value range is 1 to 128
Description
Use the interface bridge-aggregation command to create a Layer-2 aggregate interface and enter
the Layer-2 aggregate interface view.
Use the undo interface bridge-aggregation command to remove a Layer-2 aggregate interface.
Upon creation of a Layer-2 aggregate interface, a Layer-2 aggregation group numbered the same is
created automatically. Removing the Layer-2 aggregate interface also removes the Layer-2
aggregation group. At the same time, the member ports of the aggregation group, if any, leave the
aggregation group.
Examples
# Create Layer-2 aggregate interface Bridge-aggregation 1 .
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1]
lacp port-priority
Syntax
lacp port-priority port-priority
undo lacp port-priority
View
Ethernet interface view
Default Level
2: System level
Parameters
port-priority : LACP port priority, in the range of 0 to 65535.
Description
Use the lacp port - priority command to set the LACP priority of a port.
Use the undo lacp port - priority command to restore the default.
The default LACP priority of a port is 32768.