5-2
default cost (RIPng view)
Syntax
default cost cost
undo default cost
View
RIPng view
Default Level
2: System level
Parameters
cost
: Default metric of redistributed routes, in the range of 0 to 16.
Description
Use the
default cost
command to specify the default metric of redistributed routes.
Use the
undo default cost
command to restore the default.
The default metric of redistributed routes is 0.
The specified default metric applies to the routes redistributed by the
import-route
command with no
metric specified.
Related commands:
import-route
.
Examples
# Set the default metric of redistributed routes to 2.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] default cost 2
display ripng
Syntax
display ripng
[
process-id
]
View
Any view
Default Level
1: Monitor level
Parameters
process-id
: RIPng process ID, in the range of 1 to 65535.
Summary of Contents for E4510-48G
