HP E4510-48G, Command Reference Manual

Page: 689 / 1334

3-15
until it receives a response or the number of transmission retries reaches the configured limit. In the
latter case, the NAS discards the packet.
Related commands: reset stop-accounting-buffer , hwtacacs scheme , display
stop-accounting-buffer .
Examples
# In HWTACACS scheme hwt1 , enable the device to buffer the stop-accounting requests getting no
responses.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] stop-accounting-buffer enable
timer quiet (HWTACACS scheme view)
Syntax
timer quiet minutes
undo timer quiet
View
HWTACACS scheme view
Default Level
2: System level
Parameters
minutes : Primary server quiet period, in minutes. It ranges from 1 to 255 and defaults to 5.
Description
Use the timer quiet command to set the quiet timer for the primary server, that is, the duration that the
status of the primary server stays blocked before resuming the active state.
Use the undo timer quiet command to restore the default.
Related commands: display hwtacacs .
Examples
# Set the quiet timer for the primary server to 10 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer quiet 10
timer realtime-accounting (HWTACACS scheme view)
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting