HP E4510-48G, Command Reference Manual

Page: 1227 / 1334

18-19
Examples
# Configure the next hop IP address as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] next-hop 10.1.1.1
nqa
Syntax
nqa entry admin-name operation-tag
undo nqa { all | entry admin-name operation-tag }
View
System view
Default Level
2: System level
Parameters
admin-name : Specifies the name of the administrator who creates the NQA test operation, a string of 1
to 32 characters, with “-” excluded. It is case-insensitive.
operation-tag : Specifies the tag of a test operation, a string of 1 to 32 characters, with “-” excluded. It is
case-insensitive.
all : All NQA test groups.
Description
Use the nqa command to create an NQA test group and enter NQA test group view.
Use the undo nqa command to remove the test group.
Note that if the test type has been configured for the test group, you will directly enter NQA test type
view when you execute the nqa command.
Examples
# Create an NQA test group whose administrator name is admin and whose operation tag is test and
enter NQA test group view.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test]
nqa agent enable
Syntax
nqa agent enable
undo nqa agent enable