HP E4510-48G, Command Reference Manual

Page: 1188 / 1334

16-11
<Sysname> system-view
[Sysname] info-center enable
% Information center is enabled
info-center logbuffer
Syntax
info-center logbuffer [ channel { channel - number | channel - name } | size buffersize ] *
undo info-center logbuffer [ channel | size ]
View
System view
Default Level
2: System level
Parameters
channel - number : A specified channel number, in the range 0 to 9.
channel - name : Specifies a channel name, which could be a default name or a self-defined name. The
user needs to specify a channel name first before using it as a self-defined channel name. For more
information, refer to the info-center channel name command.
buffersize : Specifies the maximum number of log messages that can be stored in a log buffer, in the
range 0 to 1,024 with 512 as the default value.
Description
Use the info-center logbuffer command to enable information output to a log buffer and set the
corresponding parameters.
Use the undo info-center logbuffer command to disable information output to a log buffer.
By default, information is output to the log buffer with the default channel of channel 4 (logbuffer) and
the default buffer size of 512.
Note that the info-center logbuffer command takes effect only after the information center is enabled
with the info-center enable command.
Examples
# Configure the system to output information to the log buffer through channel 4, and set the log buffer
size to 50.
<Sysname> system-view
[Sysname] info-center logbuffer size 50
info-center loghost
Syntax
info-center loghost host - ip [ channel { channel - number | channel - name } | facility local - number ] *
undo info-center loghost host - ip