HP E4510-48G, Command Reference Manual

Page: 438 / 1334

3-4
Maximum number of balanced paths : 1
Update time : 30 sec(s) Timeout time : 180 sec(s)
Suppress time : 120 sec(s) Garbage-collect time : 120 sec(s)
update output delay : 20(ms) output count : 3
TRIP retransmit time : 5 sec(s)
TRIP response packets retransmit count : 36
Silent interfaces : None
Default routes : Only Default route cost : 3
Verify-source : Enabled
Networks :
192.168.1.0
Configured peers : None
Triggered updates sent : 0
Number of routes changes : 0
Number of replies to queries : 0
Table 3-1 display rip command output description
Field Description
RIP process RIP process ID
RIP version RIP version 1 or 2
Preference RIP route priority
Checkzero
Indicates whether the zero field check is enabled for
RIPv1 messages.
Default-cost Default cost of the redistributed routes
Summary Indicates whether route summarization is enabled
Hostroutes Indicates whether to receive host routes
Maximum number of balanced paths Maximum number of load balanced routes
Update time RIP update interval
Timeout time RIP timeout time
Suppress time RIP suppress interval
update output delay RIP packet sending interval
output count Maximum number of RIP packets sent at each interval
Garbage-collect time RIP garbage collection interval
TRIP retransmit time
TRIP retransmit interval for sending update requests
and responses.
TRIP response packets retransmit count
Maximum retransmit times for update requests and
responses
Silent interfaces
Number of silent interfaces, which do not periodically
send updates
Default routes
Indicates whether a default route is sent to RIP
neighbors
z
only means only a default route is advertised.
z
originate means a default route is advertised along
with other routes.
z
disable means no default route is advertised.