HP E4510-48G, Command Reference Manual

Page: 1321 / 1334

21-9
Default Level
3: Manage level
Parameters
member-id : ID of the IRF member, in the range 1 to 4. With this argument, you can specify a priority for
another IRF member on this device. You can view the member IDs and current priorities of IRF
members by using the display irf command.
priority : Priority value, in the range 1 to 32.
Description
Use the irf member priority command to specify a priority for an IRF member.
Use the undo irf member priority command to restore the default.
By default, the priority of an IRF member is 1.
The greater the priority value, the higher the priority. A member with a higher priority is more likely to be
a master, and more likely to preserve its ID in a member ID collision.
Note the following:
z
You can specify a priority for a member of the current IRF only.
z
The setting of priority takes effect right after your configuration.
Examples
# Specify a priority for the local device.
<Sysname> display irf
Switch Role Priority CPU-MAC
1 Slave 13 000f-e2b8-1f84
2 Slave 1 000f-e220-2122
*3 Master 20 000f-e2b8-1a82
+4 SlaveWait 1 000f-e2c8-1b82
--------------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.
The Bridge MAC of the IRF is : 000f-e2b8-1a67
Auto upgrade : yes
Mac persistent : 6 min
The above information indicates that the member ID of the local device is 4, and you can specify a
priority for the local device by providing its member ID.
<Sysname> system-view
[Sysname] irf member 4 priority 16
# Specify a priority for member 2 in the current IRF.
<Sysname> system-view
[Sysname] irf member 2 priotiry 32