4-17
View
User view
Default Level
2: System level
Parameters
interface interface-list
: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The
interface-list
argument is in the format of
interface-list
= {
interface-type
interface-number
[
to
interface-type
interface-number
] } & <1-10>, where
interface-type
represents the port type,
interface-number
represents the port number, and & <1-10> means that you can provide up to 10 port
indexes/port index lists for this argument. The start port number must be smaller than the end number
and the two ports must be of the same type.
Description
Use the
reset dot1x statistics
command to clear 802.1X statistics.
With the
interface
interface-list
argument specified, the command clears 802.1X statistics on the
specified ports. With the argument unspecified, the command clears global 802.1X statistics and
802.1X statistics on all ports.
Related commands:
display dot1x
.
Examples
# Clear 802.1X statistics on port GigabitEthernet 1/0/1.
<Sysname> reset dot1x statistics interface GigabitEthernet 1/0/1
Summary of Contents for E4510-48G
