HP E4510-48G, Command Reference Manual

Page: 1268 / 1334

20-4
Field Description
Status NDP state of a port
Pkts Snd
Number of the NDP packets sent through the
port
Pkts Rvd Number of the NDP packets received on the port
Pkts Err Number of the error NDP packets received
Neighbor 1: Aging Time
Aging time of the NDP information of a neighbor
device
MAC Address MAC address of a neighbor device
Host Name Host name of a neighbor device
Port Name Port name of a neighbor device
Software Ver Software version of the neighbor device
Device Name Device name of a neighbor device
Port Duplex Port duplex mode of a neighbor device
Product Ver Product version of a neighbor device
BootROM Ver Boot ROM version of a neighbor device
ndp enable
Syntax
In Ethernet interface view or Layer 2 aggregate interface view:
ndp enable
undo ndp enable
In system view:
ndp enable [ interface interface-list ]
undo ndp enable [ interface interface-list ]
View
System view, Ethernet interface view, Layer 2 aggregate interface view
Default Level
2: System level
Parameters
interface interface-list : Specifies an Ethernet port list, which can contain multiple Ethernet ports. The
interface-list argument is in the format of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } & <1-10>, where interface-type represents the port type,
interface-number represents the port number, and & <1-10> means that you can provide up to 10 port
indexes/port index lists for this argument.
Description
Use the ndp enable command to enable NDP.