1-30
service-type
Syntax
service-type
{
ftp
|
lan-access
| {
ssh
|
telnet
|
terminal
} * }
undo service-type
{
ftp
|
lan-access
| {
ssh
|
telnet
|
terminal
} * }
View
Local user view
Default Level
3: Manage level
Parameters
ftp
: Authorizes the user to use the FTP service. The user can use the root directory of the FTP server
by default.
lan-access
: Authorizes the user to use the LAN access service. Such users are mainly Ethernet users,
for example, 802.1X users.
ssh
: Authorizes the user to use the SSH service.
telnet
: Authorizes the user to use the Telnet service.
terminal
: Authorizes the user to use the terminal service, allowing the user to login from the console
port or AUX port.
Description
Use the
service-type
command to specify the service types that a user can use.
Use the
undo service-type
command to delete one or all service types configured for a user.
By default, a user is authorized with no service.
Examples
# Authorize user
user1
to use the Telnet service.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] service-type telnet
state
Syntax
state
{
active
|
block
}
undo state
View
ISP domain view, local user view
Default Level
2: System level
Summary of Contents for E4510-48G
