HP E4510-48G, Command Reference Manual

Page: 646 / 1334

1-31
Parameters
active : Places the current ISP domain or local user in the active state, allowing the users in the current
ISP domain or the current local user to request network services.
block : Places the current ISP domain or local user in the blocked state, preventing users in the current
ISP domain or the current local user from requesting network services.
Description
Use the state command to configure the status of the current ISP domain or local user.
Use the undo state command to restore the default.
By default, an ISP domain is active when created. So is a local user.
By blocking an ISP domain, you disable users of the domain that are offline from requesting network
services. Note that the online users are not affected.
By blocking a user, you disable the user from requesting network services. No other users are affected.
Related commands: domain .
Examples
# Place the current ISP domain aabbcc.net to the state of blocked.
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net] state block
# Place the current user user1 to the state of blocked.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-user-user1] state block
user-group
Syntax
user-group group-name
undo user-group group-name
View
System view
Default Level
3: Manage level
Parameters
group-name : User group name, a case-insensitive string of 1 to 32 characters.
Description
Use the user-group command to create a user group and enter its view.
Use the undo user-group command to remove a user group.