1-24
* engineering is strictly prohibited. Any unauthorized use of this software *
* or any portion of it may result in severe civil and criminal penalties, and*
* will be prosecuted to the maximum extent possible under the applicable law.*
******************************************************************************
<Sysname>
telnet client source
Syntax
telnet client source
{
ip
ip-address
|
interface
interface-type interface-number
}
undo telnet client source
View
System view
Default Level
2: System level
Parameters
None
Description
Use the
telnet client source
command to specify the source IP address or source interface for the
Telnet packets to be sent.
Use the
undo telnet client source
command to remove the source IP address or source interface
configured for Telnet packets.
By default, source IP address or source interface of the Telnet packets sent is not configured.
Examples
# Specify the source IP address for Telnet packets.
<Sysname> system-view
[Sysname] telnet client source ip 129.102.0.2
# Remove the source IP address configured for Telnet packets.
[Sysname] undo telnet client source
telnet server enable
Syntax
telnet server enable
undo telnet server enable
View
System view
Summary of Contents for E4510-48G
