HP AE370A - Brocade 4Gb SAN Switch 4/12, Administrator'S Manual

Page: 93 / 447

Fabric OS 5.2.x administrator guide 93
Troubleshooting certificates
If you receive messages in the browser or in a pop-up window when logging in to the target switch using
HTTPS, refer to Table 23 .
Configuring SNMP
You can configure for the automatic transmission of Simple Network Management Protocol (SNMP)
information to management stations. SNMPv3 and SNMPv1 are supported.
The configuration process involves configuring the SNMP agent and configuring SNMP traps. The
following commands are used in the process:
• Use the
configure
command to set the security level. You can specify no security, authentication only,
or authentication and privacy.
• Use the
snmpConfig
command to configure the SNMP agent and traps for SNMPv3 or
SNMPv1 configurations.
• If necessary for backward compatibility, you can use these legacy commands to configure for SNMP
v1:
• Use the
agtCfgShow
,
agtCfgset
, and
agtCfgDefault
commands to configure the SNMPv1
agent.
• Use the
snmpMibCapSet
command to filter at the trap level and the
snmpMibCapShow
command
to display the trap filter values.
The SNMP trap configuration specifies the MIB trap elements to be used to send information to the SNMP
management station. There are two main MIB trap choices:
• Brocade-specific MIB trap
Associated with the -specific Brocade MIB (SW-MIB), this MIB monitors Brocade switches specifically.
• FibreAlliance MIB trap
Associated with the FibreAlliance MIB (FA-MIB), this MIB manages SAN switches and devices from any
company that complies with FibreAlliance specifications.
If you use both SW-MIB and FA-MIB, you might receive duplicate information. You can disable the FA-MIB,
but not the SW-MIB.
Table 24 SSL Messages and Actions
Message Action
The page cannot be displayed The SSL certificate is not installed correctly or HTTPS is
not enabled correctly. Make sure that the certificate
has not expired, that HTTPS is enabled, and that
certificate file names are configured correctly.
The security certificate was issued by a
company you have not chosen to
trust….
The certificate is not installed in the browser. Install it
as described in ” Configuring the browser ” on
page 91.
The security certificate has expired or
is not yet valid
Either the certificate file is corrupted or it needs to be
updated. Click View Certificate to verify the
certificate content. If it is corrupted or out of date,
obtain and install a new certificate.
The name on the security certificate is
invalid or does not match the name of
the site file
The certificate is not installed correctly in the Java
Plug-in. Install it as described in ” Installing a root
certificate to the Java Plug-in ” on page 91.
This page contains both secure and
nonsecure items. Do you want to
display the nonsecure items?
Click No in this pop-up window. The session opens
with a closed lock icon on the lower-right corner of the
browser, indicating an encrypted connection.