HP AE370A - Brocade 4Gb SAN Switch 4/12, Administrator'S Manual

Page: 59 / 447

Fabric OS 5.2.x administrator guide 59
About the default accounts
Fabric OS provides the following predefined accounts in the switch-local user database. Change the
password for all defaults during the initial installation and configuration, see Table 13 .
Defining local user accounts
In addition to the default administrative and user accounts, Fabric OS supports up to 256 user-defined
accounts in each logical switch (domain). These accounts expand your ability to track account access and
audit administrative activities.
The following procedures can be performed on local user accounts. Administrators can act on other
accounts only if that account has an Admin Domain list that is a subset of the administrator.
NOTE: When operating in secure mode, you must perform these operations on the primary FCS switch.
The
userConfig
command with Admin Domain-related options is not valid in secure mode.
How to display account information
1. Connect to the switch and log in.
2. Enter one of the
show
commands:
•
userConfig --show -a
to show all account information for a logical switch
•
userConfig --show -b
to show all backup account information for a logical switch
•
userConfig --show username
to show account information for the specified account
•
userConfig --showad -a admindomain_ID
to show all accounts permitted to select the
specified admindomain_ID
Table 13 Default Local User Accounts
Account Name Role Admin
domain
Description
user User AD0
home: 0
Most commands have observe-only permission.
admin Admin AD0-255
home: 0
Most commands have observe-modify permission.
root Root AD0-255
home: 0
Reserved
factory Factory AD0-255
home: 0
Reserved