254 Administering FICON fabrics
Troubleshooting
The following sources provide useful problem-solving information:
•
The standard support commands (
portLogDump, supportSave, supportShow
) or the Fabric
Manager Event Log
By default, the FICON group in the
supportShow
output is disabled. To enable the capture of FICON
data in the
supportShow
output, enter the
supportshowcfgenable ficon
command. After you
get confirmation that the configuration has been updated, the following will be collected and appear in
the output for the
supportShow
command:
•
ficoncupshow fmsmode
•
ficoncupshow modereg
•
ficondbg dump rnid
•
ficondbg log
•
ficonshow ilir
•
ficonshow lirr
•
ficonshow rlir
•
ficonshow rnid
•
ficonshow switchrnid
•
ficucmd dump -A
•
Other detailed information for protocol-specific problems:
• Display port data structures using the
ptDataShow
command.
• Display port registers using the
ptRegShow
command.
Identifying ports
The
ficonshow rlir
command displays, among other information, a tag field for the switch port. You
can use this tag to identify the port on which a FICON link incident occurred. The tag field is a
concatenation of the switch domain ID and port number, in hexadecimal format. The following example
shows a link incident for the switch port at domain ID 120, port 93 (785d in hex):
switch:admin>
ficonshow rlir
{
{Fmt Type PID Port Incident Count TS Format Time Stamp
0x18 F 785d00 93 1 Time server Thu Apr 22 09:13:32 2004
Port Status: Link not operational
Link Failure Type: Loss of signal or synchronization
Registered Port WWN Registered Node WWN Flag Node Parameters
50:05:07:64:01:40:16:03 50:05:07:64:00:c1:69:ca 0x10 0x200115
Type number: 002064
Model number: 103
Manufacturer: IBM
Plant of Manufacture: 02
Sequence Number: 0000000169CA
tag: 155d
Switch Port WWN Switch Node WWN Flag Node Parameters
20:5d:00:60:69:80:45:7c 10:00:00:60:69:80:45:7c 0x00 0x200a5d
Type number: SLKWRM
Model number: 24K
Manufacturer: BRD
Plant of Manufacture: CA
Sequence Number: 000000000078
tag: 785d
}
}
The Local RLIR database has 1 entry.
switch:admin> ficonshow rlir
Summary of Contents for AE370A - Brocade 4Gb SAN Switch 4/12
