218 Using the FC-FC routing service
8.
Enter the
zoneCreate
command to create the LSAN
lsan_zone_fabric2
, which includes the host
(10:00:00:00:c9:2b:6a:2c), Target A, and Target B.
9.
Enter the
cfgShow
command to verify that the zones are correct.
10.
Enter the
cfgAdd
and
cfgEnable
commands to create and enable the LSAN configuration:
11.
Log in as an
admin
and connect to the 4/256 SAN Director with a B-Series MP Router blade.
12.
Enter the following commands to display information about the LSANs:
•
lsanZoneShow -s
shows the LSAN.
• f
crPhyDevShow
shows the physical devices in the LSAN.
• fcrProxyDevShow shows the proxy devices in the LSAN.
switch:admin_06>
zonecreate "lsan_zone_fabric2",
"10:00:00:00:c9:2b:c9:0c;50:05:07:61:00:5b:62:ed;50:05:07:61:00:49:20:b4"
switch:admin_06>
cfgshow
Defined configuration:
zone: lsan_zone_fabric2
10:00:00:00:c9:2b:c9:0c; 50:05:07:61:00:5b:62:ed;
50:05:07:61:00:49:20:b4
Effective configuration:
no configuration in effect
switch:admin_06>
cfgadd “zone_cfg”, “lsan_zone_fabric2”
switch:admin_06>
cfgenable “zone_cfg”
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected.
Do you want to enable 'zone_cfg' configuration (yes, y, no, n): [no]
y
zone config "zone_cfg" is in effect
Updating flash ...
switch:admin_06>
lsanzoneshow -s
Fabric ID: 2 Zone Name: lsan_zone_fabric2
10:00:00:00:c9:2b:c9:0c Imported
50:05:07:61:00:5b:62:ed EXIST
50:05:07:61:00:49:20:b4 EXIST
Fabric ID: 75 Zone Name: lsan_zone_fabric75
10:00:00:00:c9:2b:c9:0c EXIST
50:05:07:61:00:5b:62:ed Imported
switch:admin_06>
fcrphydevshow
Device WWN Physical
Exists PID
in Fabric
-----------------------------------------
75 10:00:00:00:c9:2b:c9:0c c70000
2 50:05:07:61:00:5b:62:ed 0100ef
2 50:05:07:61:00:5b:62:ed 0100e8
Total devices displayed: 3
switch:admin_06>
fcrproxydevshow
Proxy WWN Proxy Device Physical State
Created PID Exists PID
in Fabric in Fabric
----------------------------------------------------------------------
2 50:05:07:65:05:84:09:0e 01f001 75
0100ef Imported
2 50:05:07:65:05:84:0b:83 01f000 75
0100e8 Imported
75
10:00:00:00:c9:2b:c9:0c 02f000 2 c70000 Imported
Total devices displayed: 3
Summary of Contents for AE370A - Brocade 4Gb SAN Switch 4/12
