HP AE370A - Brocade 4Gb SAN Switch 4/12, Administrator'S Manual

Page: 137 / 447

Fabric OS 5.2.x administrator guide 137
Implementing admin domains
To begin implementing an Admin Domain structure within your SAN, you must first set the default zone
mode to No Access. You must be in AD0 to change the default zone mode. You can use the
defZone
--show
command to see the current default zone mode setting.
To set the default zone mode
1. Log in to an AD-aware switch in the fabric with the appropriate RBAC role.
2. Ensure you are in the AD0 context.
Use the
ad --show
command to determine the current Admin Domain and the
ad --select 0
command to switch to the AD0 context, if necessary.
3. Enter the
defZone --noAccess
command, and respond to the prompt with a y .
4. Enter the
cfgSave
command.
Creating an admin domain
To create an Admin Domain, you must specify an Admin Domain name or number or both.
• If you specify only a number, the Admin Domain name is automatically assigned to be “AD
n
”, where
n
is the number you specified.
• If you specify only a name, the Admin Domain number is automatically assigned to be the lowest
available AD number, except if you specify a name in the format “AD
n
”, in which case the Admin
Domain number is assigned to be
n
.
When you create an Admin Domain, you must specify at least one member (switch, switch port, or device).
You cannot create an empty Admin Domain. For more information about these member types, see ” Admin
domain member types ” on page 132.
You create Admin Domains in the transaction buffer using the
ad --create
command. You can either
save the newly created Admin Domain to a defined configuration (using
ad --save
) or make it the
effective Admin Domain configuration directly (using
ad --apply
).
The following procedures describe the steps for creating Admin Domains and include examples.
Before creating an Admin Domain, you must set the default zone mode to No Access using the
defZone
command, as described in ” Implementing admin domains ” on page 137.
To create an Admin Domain
1. Log in as the physical fabric administrator to an AD-aware switch in the fabric.
2. Switch to the AD255 context, if you are not already in that context:
ad --select 255
3. Enter the
ad --create
command using the
-d
option to specify device and switch port members
and the
-s
option to specify switch members:
ad --create ad_id -d " dev_list " -s " switch_list "
where
ad_id
is the Admin Domain name or number,
dev_list
is a list of device WWNs or (domain,
port) members, and
switch_list
is a list of switch WWNs or domain IDs.
sw5:admin> defzone --noaccess
You are about to set the Default Zone access mode to No Access
Do you want to set the Default Zone access mode to No Access ? (yes, y, no, n):
[no] y
sw5:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y
Updating flash ...
sw5:admin>