HP AE370A - Brocade 4Gb SAN Switch 4/12, Administrator'S Manual

Page: 186 / 447

186 Configuring Directors
Table 48 lists the supported configurations options for Fabric OS 5.2.x. Table 49 lists configuration options
and resulting slot configurations.
NOTE: At the time of this document’s release, HP does not support the FC4-16IP blade. Consult
http://www.hp.com for the latest, updated information.
See Table 46 on page 184 for details about the different blades, including their corresponding IDs.
The following sections contain procedures for obtaining chassis information and for configuring Director
domains using the
chassisConfig
command.
Table 48 Supported configuration options
Option Number of
domains
Maximum number
of ports per switch
Supported port
blades
Supported
CP blades
Notes
1 1 128 FC2-16, FC4-16 CP2 or CP4 Option 1 is the
default
configuration
for SAN
Director
2/128.
2 2 64/64 FC2-16 CP2
5 1 384 FC4-16, FC4-16IP,
FC4-32, FR4-18i,
FR4-48
1
1. L_Ports are not supported on the FC4-48 blade.
CP4 Option 5 is the
default
configuration
option for
4/256 SAN
Director.
Table 49 Configuration options and resulting slot configurations
Option Result
1 One 128-port switch (Blade IDs 4, 17 on slots 1–4, 7–10. Blade ID 5 and 16 on slots
5, 6)
2 Two 64-port switches (Blade ID 4 on slots 1–4, 7–10. Blade ID 5 on slots 5, 6)
5 One 384-port switch (Blade IDs 4, 17, 18, 31, and 36 on slots 1–4, 7–10. Blade ID
16 on slots 5, 6)