HP AE370A - Brocade 4Gb SAN Switch 4/12, Administrator'S Manual

Page: 35 / 447

Fabric OS 5.2.x administrator guide 35
The licensed features currently installed on the switch are listed. If the feature is not listed, reissue
the
licenseAdd
command.
d. Some features may require additional configuration, or you might need to disable and re-enable the
switch to make them operational; refer to the feature documentation for details..
How to remove a licensed feature
1. Connect to the switch and log in as admin.
2. Enter the
licenseShow
command to display the active licenses.
3. Remove the license key using the
licenseRemove
command.
The license key is case sensitive and must be entered exactly as given. The quotation marks in this
command are optional. After removing a license key, the optionally licensed feature is disabled when
the switch is rebooted or when a switch disable or enable is performed.
4. Enter the
licenseShow
command to verify that the license is disabled.
After a reboot (or
switchDisable
and
switchEnable
) only the remaining licenses appear:
If there are no license keys,
licenseShow
displays “No licenses.”
switch:admin> licenseshow
RzdeSee9wVlfTu:
Web license
Zoning license
SES license
Fabric license
Remote Switch license
Extended Fabric license
Fabric Watch license
Performance Monitor license
Trunking license
Security license
4 Domain Fabric license
FICON_CUP license
N_Port ID Virtualization license
FCIP license
Ports on Demand license - additional 16 port upgrade
2 Domain Fabric license
Ports on Demand license - additional 16 port upgrade
switch:admin> licenseremove “ key ”
switch:admin> licenseshow
bQebzbRdScRfc0iK:
Web license
Zoning license
switch:admin> licenseremove “bQebzbRdScRfc0iK”
removing license key “bQebzbRdScRfc0iK”
switch:admin>
switch:admin> licenseshow
SybbzQQ9edTzcc0X:
Fabric license
switch:admin>