manualshive.com logo in svg

HP AE370A - Brocade 4Gb SAN Switch 4/12, Administrator'S Manual

The HP AE370A - Brocade 4Gb SAN Switch 4/12 is a powerful networking solution providing superior performance. To access the comprehensive Administrator's Manual, visit our website and download it for free. Unlock the full potential of this product with the detailed manual available at manualshive.com.

Share
Download
background image

Fabric OS 5.2.x administrator guide

11

To check for a loop initialization failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   297

To check for a point-to-point initialization failure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  298

To correct a port that has come up in the wrong mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   298

Correcting marginal links. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   299

Inaccurate information in the system message log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  300

Recognizing the port initialization and FCP auto discovery process. . . . . . . . . . . . . . . . . . . . . . . . . . . .   300

Port mirroring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   301

Supported hardware  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   302

How port mirroring works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   303

Port mirroring considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   304

Creating, deleting, and displaying port mirroring  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   305

16Administering NPIV  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307

Enabling and disabling NPIV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   307

Configuring NPIV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   307

Configuration scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   308

Viewing NPIV port configuration information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   308

Displaying login information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   310

17Administering Advanced Performance Monitoring (APM). . . . . . . . . . . . . . . . . . . . . . . 311

Displaying and clearing the CRC error count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  313

Monitoring end-to-end performance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   313

Adding end-to-end monitors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   314

Setting a mask for end-to-end monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  315

Deleting end-to-end monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   316

Monitoring filter-based performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   317

Adding standard filter-based monitors  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  317

Adding custom filter-ased monitors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   318

Deleting filter-based monitors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   319

Monitoring ISL performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   320

Monitoring trunks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   320

Displaying monitor counters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   321

Clearing monitor counters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   323

Saving and restoring monitor configurations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   324

Collecting performance data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   324

18Administering Extended Fabrics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325

About extended link buffer allocation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   325

SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, SAN Director 2/128, and 4/256 SAN Director 

(FC2-16 port blades) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   325

HP StorageWorks SAN Switch 4/32, 4/256 SAN Director, 4/64 SAN Switch, 400 MP Router and (FC4-16, 

FC4-32 and B-Series MP Router port blades)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  325

Fabric considerations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   325

Choosing an Extended ISL mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   326

Configuring external ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   328

Configuring an extended ISL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   330

19Administering ISL Trunking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   333

Standard trunking criteria  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   334

Fabric considerations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   334

Initializing trunking on ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   335

Monitoring traffic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   336

Enabling and disabling ISL trunking  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   337

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   337

Setting port speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   338

Displaying trunking information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   339

Trunking over Extended Fabrics  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   340

Trunking distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   340

Troubleshooting trunking problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   341

Summary of Contents for AE370A - Brocade 4Gb SAN Switch 4/12
































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AE370A - Brocade 4Gb SAN Switch 4/12

Panasonic CF-AAV1601AW User Manual preview
CF-AAV1601AW
Brand: Panasonic Pages: 8
Zonet ZEW2500P Product Data preview
ZEW2500P
Brand: Zonet Pages: 2
Harman Kardon BTA 10 Quick Setup Manual preview
BTA 10
Brand: Harman Kardon Pages: 8
Jabra LINK 350 Datasheet preview
LINK 350
Brand: Jabra Pages: 2
Enercell Enercell 273-331 User Manual preview
Enercell 273-331
Brand: Enercell Pages: 1
BeeWi BWA211 User Manual preview
BWA211
Brand: BeeWi Pages: 73
Aeon Labs Z-Stick Series 2 Operating Instructions preview
Z-Stick Series 2
Brand: Aeon Labs Pages: 2
Flying Voice FTA1101 User Manual preview
FTA1101
Brand: Flying Voice Pages: 46
NEC DSX Series Handbook preview
DSX Series
Brand: NEC Pages: 94
NEC DSX Software Manual preview
DSX
Brand: NEC Pages: 984
NEC IP3NA-BHA Connection Manual preview
IP3NA-BHA
Brand: NEC Pages: 2
Sony CBK-WA100 Brochure & Specs preview
CBK-WA100
Brand: Sony Pages: 2
Sony BRAVIA KDL-60EX701 Specifications preview
BRAVIA KDL-60EX701
Brand: Sony Pages: 2
Sony BRAVIA KDL-55EX711 Features & Specifications preview
BRAVIA KDL-55EX711
Brand: Sony Pages: 2
Sony BKM-V11 Operating Instructions preview
BKM-V11
Brand: Sony Pages: 2
Sony BKM-V10 Operating Instructions preview
BKM-V10
Brand: Sony Pages: 2
Sony BKM-FW50 Specifications preview
BKM-FW50
Brand: Sony Pages: 2
Sony BKM-FW50 Brochure preview
BKM-FW50
Brand: Sony Pages: 4

Brands by name

Popular brands

Load more brands