Hioki 8860-50 Instruction Manual Download

Page: 342 / 490

12.6 Setting the Print Content

330

Channel Marker (Channel Number or Comments) Settings

To open the screen: Press the

SET

key



Select

with the

SUB MENU

keys



Print Settings screen

See

Screen Layout (p. 41)

Operating Key

Procedure

SHEET/PAGE

Select the

[Print Items]

page.

Select the type of channel marker.

CURSOR

Move the cursor to the

[Channel Markers]

item.

F1 to F8

Select the type of channel marker.

Specify the channel marker position.

CURSOR

Move the cursor to the

[Marker Position]

item.

F1 to F8

Select either choice.

Off

Do not print the channel number or
comments on the recording paper.

Ch No.

Print the channel number on the re-
cording paper (default setting).

Comments

Print the comments entered in the
Channel Settings screen over the
waveform on the recording paper.
Comment Setting:(p. 119)

Inside

Print near the waveform at intervals of
about one channel per division(default
setting).

Outside

Print after the waveform.

Inside

Outside

CH1

List and Gauge Settings

To open the screen: Press the

SET

key



Select

with the

SUB MENU

keys



Print Settings screen

See

Screen Layout (p. 41)

Operating Key

Procedure

SHEET/PAGE

Select the

[Print Items]

page.

CURSOR

Move the cursor to the

[List & Gauge]

item.

F1 to F8

Select the type of print items.

Off

Do not print a list of settings or
gauge (default setting).

List

Print a list of settings. The list is
printed after the waveform.

Gauge

Print a gauge. The gauge is printed
before the waveform.

List & Gauge

Print a list and gauge.

Gauge

List

Summary of Contents for 8860-50











































































































































































































































































































































































































































































































Search results

Summary of Contents for 8860-50

Reviews:

Related manuals for 8860-50

Brands by name

Popular brands

Hioki 8860-50, Instruction Manual

Search results

Summary of Contents for 8860-50

Reviews:

Related manuals for 8860-50

Brands by name

Popular brands