Hioki 8860-50, Instruction Manual

Page: 242 / 490

8.14 Searching a Waveform
230
Operating Key Procedure
6
(If searching for local maxima or minima)
Set the criteria for the local maximum or minimum value
(Filter).
CURSOR
F1 to F8 Move the cursor to the [Filter] item.
Set the criteria for the local maximum or mini-
mum value. (1div = 100 points)
Search
7
CURSOR
F1
Move the cursor to the [Exec] button.
Starts searching.
[Searching] appears on the Status bar, and the
locations where search criteria are satisfied are
displayed.
Search markers (
indicate locations where
search criteria are met.
To search for more instances (local maximum or mini-
mum values only)
F2 Select [Next] .
To move a cursor to a found location
F4
or
F5
Select [Move Cur A] or [Move Cur B] .
To insert an event mark at a location where search
criteria are met.
CURSOR
F6
Move the cursor to the [Mark] button.
Select [Mark].
8
Close the search function.
F8 Select [Close] .
Off
When a value is larger (or smaller) than the
value of the data points immediately before
and after it, that value is considered to be a
local maximum (or minimum) (default set-
ting).
0.1 to
10.0 div
When a value is larger (or smaller) than the
values of all of the data points within the
specified range before and after it, that val-
ue is considered to be a local maximum (or
minimum).
S
Local maxima when the filter setting
is Off
Local maximum when the filter setting
is 0.1 div (0.1div=10 points)
10 points 10 points