Hioki 8860-50, Instruction Manual

Page: 109 / 490

4.2 Setting Measurement Configuration (Status Settings Screen)
97
4
Chapte
r 4
Me
asuremen
t Co
nfiguration Sett
ings
Set the length (number of divisions) to record each time data is acquired.
The following methods and settings are available:
• Fixed recording length [Fixed]: select from the fixed recording lengths
(p. 97).
• Set arbitrary recording length [User]: set an arbitrary recording length in
units of divisions (p. 99).
• Continuous [Cont]: records continuously (Recorder Function only) (p. 101).
Recording Length and Data Samples
• Memory Function and memory waveforms with the REC&MEM function.
Each division of the recording length consists of 100 data samples. The total
number of data samples for a specified recording length = set recording length
(divisions) × 100 + 1.
• Recorder Function and recorder waveforms with the REC&MEM function.
Each recording length division = 100 pairs of data points, with each pair com-
posed of two samples: the maximum and minimum measured values within
each sampling period.
See "Appendix 4.4 Recorder Function Values" (p. A50)
4.2.4 Setting the Recording Length (number of divi-
sions)
To change recording length while measuring
Recording length can be changed on the Waveform or Settings screens. The re-
cording length becomes effective at the time the setting is changed.
See Modifying the Waveform screen view: "4.4 Setting Measurement Configuration on
the Waveform Screen" (p. 114)
3
2
Setting a Fixed Recording Length (Fixed Shot)
To open the screen: Press the
SET
key

Select with the
SUB MENU
keys

Status Settings screen
See Screen Layout (p. 28), To set from the Waveform screen (p. 114)
Operating Key Procedure
1
(with the Memory function)
SHEET/PAGE Select the [Basic] page.
2
Select the setting method for recording length.
CURSOR Move the cursor to the [Shot] item.
F1 Select [Fixed] .
3
Set the recording length.
CURSOR Move the cursor to the [Fixed Shot] (Fixed re-
cording length) item.
F1 to F8
(Switch Display: F8)
Select the length of waveform to be acquired (re-
cording length).
Displayed recording time and maximum
recording length are linked to the record-
ing length setting.
1
(Memory Function case)